NEC QX-S6648XP-6Q Installation Manual Download Page 38

Page: 38 / 137

Installation Guide
QX-S6600 Series Ethernet Switches

3 Installing the switch

3-16

Installing an LSWM3HFANSC/LSWM3HFANSCB fan tray (to QX-S6632QP)

Installing an LSPM1FANSA/ LSPM1FANSB fan tray (to QX-S6648XP-6Q, QX-S6648XT-6Q)

3.3.2 Removing a fan tray

WARNING:



Take out the fan tray after the fans completely stop rotating.



To avoid an unbalanced fan causing loud noise, do not touch the fans, even if they are not rotating.

To remove a fan tray:

1) Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is

well grounded.

2) Loosen the captive screw of the fan tray with a Philips screwdriver until it is fully

disengaged from the switch chassis.

3) Grasp the handle of the fan tray with one hand and pull the fan tray part way out the

Summary of Contents for QX-S6648XP-6Q










































































































































Search results

Summary of Contents for QX-S6648XP-6Q

Reviews:

Related manuals for QX-S6648XP-6Q

Brands by name

Popular brands

NEC QX-S6648XP-6Q, Installation Manual

Search results

Summary of Contents for QX-S6648XP-6Q

Reviews:

Related manuals for QX-S6648XP-6Q

Brands by name

Popular brands