Installation Guide
QX-S6600 Series Ethernet Switches
3-11
NOTE:
The power and grounding terminals in this section are for illustration only.
3.2.1 Grounding the switch with a grounding strip
WARNING:
Connect the grounding cable to the grounding system in the equipment room. Do not connect it to a fire main or
lightning rod.
If a grounding strip is available at the installation site, connect the grounding cable to the
grounding strip.
To connect the grounding cable:
1) Attach the two-hole grounding lug at one end of the grounding cable to a grounding
point on the switch chassis (see "
Connecting the grounding cable to the chassis
").
2) Remove the hex nut of a grounding post on the grounding strip.
3) Attach the ring terminal at the other end of the grounding cable to the grounding strip
through the grounding post, and fasten the ring terminal with the removed hex nut.
