![background image](http://html.mh-extra.com/html/nec/pxt-42xd2/pxt-42xd2_owners-manual_250137008.webp)
Insert the AC plug into a conveniently located AC outlet.
=
This product should be operated only from the type of power source indicated on the marking label.
=
Always unplug the AC cord from power outlet when not using for a long period of time.
75-ohm coaxial cable (round cable)
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
=
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.
=
The antenna cable should not be bundled with the power cord and the like.
=
Since your new TV has a digital receiver, please ensure you have the best possible antenna installation so to avoid picture defects
and disappointment, otherwise picture defects may occur.
TV REAR
RF
Antenna Connection
Preparations
(Continued)
Power Connection
Note
Note
6
Summary of Contents for PXT-42XD2
Page 1: ...PXT 42XD2 42 HIGH DEFINITION PLASMA TV ...
Page 34: ...5944029910 Ver 1 0 ...