Fully tighten the four partially tightened screws.
*Push the speaker against the monitor while driving the screw.
Connecting the cords
5
RIGHT
LEFT
●
Do not move the monitor by holding onto the speakers which
have been mounted to the monitor.
This could cause the monitor to fall and result in injury.
●
Fasten the screws securely. Failing to do so could cause the
speakers to fall and result in injury.
WARNING
Connect the display’s SPEAKER R and L terminals
with the speakers’ terminals using the included
connection cords.
Turn off the power of all connected units before connecting the cords.
Hold down the button of the connection terminal
with your finger, insert the conductor of the
connection cable, and release your finger.
Red
Black
＋ −
There is polarity with the conductor of each
connection cord.
Connect each conductor to the correct terminal.
Peel off the protective tape from the back of the clamper, then
mount the clamper in the desired position and clamp the cords
together.
Cord Clamper
5
PX-42SP1Uﾚｲ(NEW) 05.9.15 4:34 PM ページ 13
