Standard Server Features
Table 1-2 describes the server's standard features.
Table 1-2. Standard Server Features
ProServa
PH SMP-2/133 High
Availability System
Intel Pentium 133-MHz 2-way SMP processor
32-MB system memory
1 MB synchronous secondary cache per processor
Intel EtherExpress PRO/100B Adapter LAN board
Two, 2-GB Fast/Wide SCSI-2 hard disks
4X SCSI CD-ROM reader
LANDesk Server Monitor Module
2-channel PCI Raid Module
3 1/2-inch diskette drive
ProServa
PH SMP-4/133 Network
Ready System
Intel Pentium 133-MHz quad-processors
64-MB ECC system memory
1-MB synchronous secondary cache per processor
Intel EtherExpress PRO/100B Adapter LAN
One, 2-GB Fast/Wide SCSI-2 hard disk
4X SCSI CD-ROM reader
3 1/2-inch diskette drive
ProServa
PH SMP-4/133 High
Availability System
Intel Pentium 133-MHz quad-processors
64-MB ECC system memory
1-MB synchronous secondary cache per processor
Intel EtherExpress PRO/100B Adapter LAN
Two, 2-GB Fast/Wide SCSI-2 hard disks
4X SCSI CD-ROM reader
LANDesk Server Monitor Module
2-channel PCI RAID Module
3 1/2-inch diskette drive
Feature
Description
Two-Segment PCI
Bus
Fully PCI 2.1 compliant bus performance at 33 MHz with a
bandwidth of up to 133 MB/second. The two 32-bit segments
provide maximum system performance.
EISA Bus
Fully EISA 3.12 compliant bus performance at 8.33 MHz with a
bandwidth of up to 33 MB/second.
Single to 4-Way
Pentium Processor
Support
Two CPU module expansion slots support up to two CPU modules,
each containing up to two Pentium processors. Dual/quad
processing enhances system performance and enables symmetric
multiprocessing (SMP) on supported operating systems. Onboard
L1 cache has 8K each for code and data.
Advanced Programmable
Interrupt Controller (APIC)
APIC controls interrupt detection and notification, and is
used in conjunction with SMP. Use of APIC reduces the load
on the system bus, as the APIC uses a serial bus to transmit
and receive interrupts.
