background image

User's Guide

MB Model

Checking Included Accessories .............................................2

Connecting Included Accessories ..........................................2

Windows Setup ......................................................................3

Knowing the Parts ..................................................................6

Mouse.....................................................................................8

LAN Function..........................................................................8

Opening and Closing Covers ...............................................10

Memory ............................................................................... 13

PCI board/PCI Express x16/x1 board ................................. 14

System Configuration .......................................................... 16

Security Chip Function ........................................................ 17

Applications ......................................................................... 18

Recovery ............................................................................. 19

Appendix ............................................................................. 23

Note:The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.

This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and 
understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows 8.1" refers to 

Windows

®

 8.1 Pro 64-bit system. System configuration and software installation should be conducted by a user who has administrator privileges. If a 

[User Account Control] screen comes up, please be sure to confirm the contents before continuing.

The information contained within this manual applies to the following models:

• MB Model: MC32M/B-H, MC34L/B-H, MG32M/B-H, MG34L/B-H

Note:For details about a model number, please see “Model number list” (p.24).

1

2

3

4

1

5

6

7

8

9

10

11

12

13

Summary of Contents for PowerMate MB MC32M/B-H





























Reviews: