Disassembly and Reassembly - 6
11. Slide the CD-ROM drive towards the front to disengage the
lock at the opposite side of the drive.
12. When the screws appear in the opening as shown in Fig. 8:
tilt the CD-ROM drive and pull it out of the bay.
Fig. 8:
Sliding the drive releasing lock screws
13. Turn the CD-Rom drive on its side with the lock screws
upwards and remove the screws as shown.
14.
Fig. 9:
Removing the lock screws
4. Removing the Front Bezel
To remove the front bezel, first open the chassis (see section
Opening the Chassis
), remove the drive bay(see section
Removing the Drives Bay
), then do as follows:
1. Unlock the three lower latches Fig. 10:
2. Tilt the front bezel upwards.
3. Carefully unlock the four upper latches (see Fig. 10: ) using
a flatbed screwdriver
E