background image

6

Specifications

Screen Size

53.2"(H)

29.9"(V) inches

1351(H)

760(V) mm

diagonal 61"

Aspect Ratio

16 : 9

Resolution

1365(H)

768(V) pixels

Pixel Pitch

0.039"(H)

0.039"(V) inches

0.99(H)

0.99(V) mm

Color Reproduction

256 levels, 16,770,000 colors

Signals

Synchronization Range

Horizontal : 15.5 to 110 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)

Input Signals

RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals 

(VIDEO1 and RGB1 can also be used as OUTPUT terminals)

RGB

Visual 1 (Analog)

mini D-sub 15-pin

1

Visual 2 (Analog)

BNC (R, G, B, H/CS, V)

1*

2

Visual 3 (Digital)

DVI-D 24-pin

1*

3

Video

Visual 1

BNC

1

Visual 2

RCA-pin

1

Visual 3

S-Video: DIN 4-pin

1

DVD/HD/DTV

Visual 1

RCA-pin (Y, PB[CB], PR[CR])

1*

1

Visual 2

BNC (Y, PB[CB], PR[CR])

1*

1, 

*

2

Audio

Stereo RCA

3 (Selectable)

External Control

D-sub 9-pin

1 (RS-232C)

Sound output

9W+9W at 6 ohm

Power Supply

AC120V 50/60Hz

Current Rating

6.7A (maximum)

Power Consumption

540W (typical)

Dimensions

57.9 (W)

34.7 (H)

4.7 (D) inches

1470 (W)

880 (H)

119(D) mm

Weight

134.5 lbs / 61.0 kg  (without stand)

Environmental Considerations

Operating Temperature

0°C to 40°C / 32°F to 104°F

Humidity

20 to 80% (no condensation)

Altitude

0 to 9180 feet / 0 to 2800 m

Storage

Temperature

-10°C to 50°C / 14°F to 122°F

Humidity

10 to 90% (no condensation)

Altitude

0 to 9840 feet / 0 to 3000 m

Front Panel User Controls

Power on/off, Input source select,
Volume up/down/ OSM control

Remote Control Functions

Power on/off, Input source select, OSM
control,Volume up/down, Cursor (UP,
DOWN,LEFT, RIGHT), Pointer, Zoom up/
down, Off timer, Wireless/ Wired remote
control

OSM Functions

Picture (Contrast/Brightness/Sharpness/ Color/Tint/
Picture mode/Noise reduction/Color temperature/
White balance/Gamma/Low tone/Color tune), Audio
(Bass/Treble/Balance/Audio input), Image Adjust
(Aspect mode/V-Position /H-Position/V-Height /H-
Width/Auto Picture/Fine picture/Picture adjustment),
Option1 (OSM/BNC Input/D-Sub Input/RGB Select/
HD Select/Input Skip/All Reset), Option2 (Power
management/Cinema mode/Long life [PLE, Orbiter,
Inverse, White, Screen wiper, Soft focus]/Gray level/
S1/S2/Picture size/DVI Set up), Option3 (Timer Power
on mode/Control lock/IR Remote/Loop out/ID
number/Video wall [Divider, Position, Disp. mode,
Auto ID, Image adjust, Power on delay, PLE link,
Timer]), Advanced OSM, Language*, Color system,
Source information
*English, German, French, Italian, Spanish, Swedish,
Chinese

The features and specifications may be subject to change without
notice.

*

1

HD/DVD/DTV input signals supported on this system
480P (60 Hz)

480I (60 Hz)

525P (60 Hz)

525I (60 Hz)

576P (50 Hz)

576I (50 Hz)

625P (50 Hz)

625I (50 Hz)

720P (60 Hz)

1035I (60 Hz)

1080I (50 Hz)

1080I (60 Hz)

*

2

The 5-BNC connectors are used  as RGB/PC2 and HD/DVD2 input.
Select one of them under “BNC INPUT”.

*

3

61XM2A is not compatible with HDCP.
61XM2A/S is compatible with HDCP.

Supported Signals

• 640

480P @ 59.94/60Hz

• 1280

720P @ 59.94/60Hz

• 1920

1080I @ 59.94/60Hz

• 720

480P @ 59.94/60Hz

• 720

480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed
properly. The proglem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc...). If you do experience
such a problem please contact NEC Solutions (America), Inc. and also
the manufacturer of the source equipment.

Units are in inch

(mm)

4.7"

(119)

1.8"
(45)

2.9"
(74)

57.9" (1470)

34.7" (880)

53.2" (1351)

29.9" (760)

Other Features

Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3
pull down Converter (NTSC, 480I, 525I, 1035I,
1080I (60Hz)), 2-2 pull down Converter (PAL,
576I, 625I, NTSC, 480I, 525I), Digital Zoom
Function (100-900% Selectable), Video Wall 2

×

2/

3

×

3 multi screen, Self Diagnosis, Anti Image

Burn (PLE LOCK1~3, INVERSE, WHITE,
ORBITER (Auto1,2/Manual), SCREEN WIPER),
Color Temperature select (high/mid/mid low/low,
user has 4 memories), Control lock (Except power
SW), Auto Picture, Input Skip, Color Tune, Low
Tone (3 mode), Auto ID, Programmable Timer,
Gamma Correction (4 mode), Loop through
interface, Plug and play (DDC1, DDC2b, RGB3:
DDC2b only)

Accessories

Remote control with two AAA batteries, Power
cord, Manuals, Safety metal fitting parts, Ferrite
cores, Bands, Cable clamps

Regulations

61XM2A:

UL Approved (UL 60950/CSA C22.2
No.60950-00)
DOC Canada requirements
Meets FCC Class A requirements

61XM2A/S:

UL Approved (UL 60950 and UL65000/CSA
C22.2 No.60950-00/ CAN/CSA-E60065-00)
DOC Canada requirements
Meets FCC Class B requirements

61XM2A:

Bezel color is gray.

61XM2A/S: Bezel color is silver.

Summary of Contents for PlasmaSync 61XM2









Reviews: