2) Connector on the external equipment side: Serial port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of
connector and the pin assignment.
3) Wiring
Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices.
These data line pairs are RXD (Receive data) and TXD (Transmit data), DTR
(DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS
(Clear to send).
Communication Parameters
(1) Communication system
Asynchronous
(2)
Interface
RS-232C
(3) Baud rate
9600
bps
(4) Data length
8
bits
(5)
Parity
Odd
(6) Stop bit
1
bit
(7) Communication code Hex
3
Summary of Contents for PlasmaSync 42VP4D
Page 2: ......
Page 54: ...NEC plasma display External Control Manual for PX 50XM3 PX 42XM2 PX 42VP4...
Page 115: ......