NEC PH1202HL Page 2 User Manual Download | Manualshive

Page: 2 / 198

background image

Ver. 1 3/15

• Apple, Mac, Mac OS, and MacBook are trademarks of Apple Inc. registered in the U.S. and other countries.
• Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered

trademark or trademark of Microsoft Corporation in the United States and/or other countries.

• MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.
• Adobe, Adobe PDF, Adobe Reader, and Acrobat are either registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

• Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.
• HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

• DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Associa-

tion.

• HDBaseT™ is a trademark of HDBaseT Alliance.

• DLP is a trademark of Texas Instruments.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other

countries and areas.

• Blu-ray is a trademark of Blu-ray Disc Association
• CRESTRON and ROOMVIEW are registered trademarks of Crestron Electronics, Inc. in the United States and other

countries.

• Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.
• Other products and company names mentioned in this user’s manual may be the trademarks or registered trade-

marks of their respective holders.

•  TOPPERS Software Licenses
  The product includes software licensed under TOPPERS License.
  For more information on each software, see “readme_English.pdf” inside the “about TOPPERS” folder on the sup-

plied CD-ROM.

NOTES

(1) The contents of this user’s manual may not be reprinted in part or whole without permission.
(2) The contents of this user’s manual are subject to change without notice.
(3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable

points, errors or omissions, please contact us.

(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed

to result from using the Projector.

«
1
2
3
4
...
»

Summary of Contents for PH1202HL







































































































































































































Reviews:

No comments

Related manuals for PH1202HL

Brand: Shenzhen Optlaser Technologies Co., Ltd Pages: 8

Brand: GAF Pages: 12

Brand: Vidikron Pages: 52

E-VISION 4500 series

Brand: Digital Projection Pages: 30

Brand: Kodak Pages: 24

Brand: Eaton Pages: 12

Brand: iGGUAL Pages: 12

Brand: CyberPower Pages: 2

Brand: Hitachi Pages: 12

Brand: Hitachi Pages: 3

Brand: Hitachi Pages: 3

Brand: Hitachi Pages: 3

Brand: Hitachi Pages: 44

Brand: Hitachi Pages: 121

Brand: CYP Pages: 52

Brand: Hitachi Pages: 3

Brand: Honeywell Pages: 17

Brand: Honeywell Pages: 241

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands