NEC PH1201QL, User Manual

Page: 37 / 87

page 29
Model No. NP-PH1201QL
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Selecting a title or test pattern
The projector arrives with titles and test
patterns already configured. If you need
to change the configuration, contact your
dealer.
Selecting a title
Connect the title you wish to display and
switch on the input source, then switch
on the projector. If necessary, unlock the
keypad.
If the title is assigned a shortcut, press the
shortcut button and the projector will begin
displaying the title.
If there is no shortcut assigned to the title:
1. Press the
MENU button.
2. Press the LEFT or RIGHT button to
cycle through the list of menus until
Title
Select
appears on the LCD screen. The
list of menus is as follows:
•
Title Select
•
Configuration
•
(Title Setup)
•
Information
•
...
3. When
Title Select
is displayed, press
DOWN
.
4. Press
LEFT
or
RIGHT
to go through the
list of available titles until you reach the
title you wish to display.
5. Press
ENTER
to confirm your choice.
The projector begins displaying the title.
An asterisk mark (*) appears on the LCD
screen to indicate the current selection.
Notes
For detailed information about
switching on the projector and
unlocking the keypad, see
Switching the projector on earlier
in this guide.
Menus and menu items displayed in
parentheses can only be accessed
by service personnel.

Title Select

 
Title Select
 

Title Name

Title Select

(*)


Title Name
