20
2. Setting Up Your Projector
Lens unit mounting method
Preparation: Removing the lens cover (
→
NOTE:
• Once the lens covers are removed, it will activate the protection circuit. After mounting the lens, securely install the lens cover.
* NP-9LS08ZM1 is used on the explanatory illustration.
1. Remove the front and rear lens caps on the lens unit:
NOTE:
• Pay enough attention not to touch the lens surface, it may be cause
of soil and scratch damage.
Front lens cap
Rear lens cap
Connecting position (three positions)
2. Mount the lens unit onto the projector.
①
Alight the connecting positions of the lens unit to the
projector connector socket and insert the lens unit
straight.
②
Turn the optional lens clockwise until click sound is heard,
the optional lens is mounted on the projector securely.
Lens hood
3. Remove the lens hood. (For NP-9LS08ZM1 only)
①
Remove the lens hood fixing screw by a 2.5mm hexagon
headed driver.
②
Turn the lens hood and remove it from the optional
lens.
Lens hood
Lens hood fixing screw
Condition without the lens hood
