14
Channels order changing
Select the programme to move using the remote
control CURSOR UP/ DOWN buttons.
Press the remote control MOVE button : the
programme appears as red and can be moved
to another place using the remote control
CURSOR UP/ DOWN buttons.
When required position is reached, confirm this
new position by pressing the remote control
MOVE button. Then, the programme appears
again as green.
Entering a station name. - copying a
programme to another programme number
Use Install menu "NAME" and " STORE TO"
functions as explained in manual channel tuning
paragraph.
MANUAL CHANNEL SETTINGS
Choose starting point
Select with "PROGRAM" function the programme
from which you want to start manual tuning.Then,
the channel number, the frequency, the name and
the programme number of this programme are
displayed in the install menu.
Channel searching
Select "FREQ." function.
Press the remote control CURSOR RIGHT / LEFT
buttons for more than 3 seconds to start (up / down)
manual tuning.
After searching, tuning will stop automatically at the
next channel. (To stop searching press the remote
control MENU button)
Note: If you know the channel number or the
frequency of the channels you want to
search, you can tune directly to these
channels, entering this data directly into the
"CHANNEL" or "FREQ." function.
CH
CH
VOL
VOL
CH
CH
VOL
VOL
CH
CH
MENU
VOL
VOL
MOVE