NEC PA1004UL-B User Manual Download Page 150

Page: 150 / 240

5. Using On-Screen Menu

126

TIP:
• Check whether the automatic [DESKTOP FRONT] is installed within ± 10 degrees for floor installation and whether the [CEILING

FRONT] is within ±10 degrees for ceiling installation. Select manually when the projection screen is inverted.

Selecting Aspect Ratio and Position for Screen [SCREEN]

[SCREEN TYPE]

Sets the aspect ratio of the projection screen.

FREE

The ratio of the liquid crystal panel is selected. Select this when projecting multi-screen and 17:9
screen (2K).

4:3 SCREEN

For a screen with a 4:3 aspect ratio

16:9 SCREEN

For a screen with a 16:9 aspect ratio

16:10 SCREEN

For a screen with a 16:10 aspect ratio

NOTE:
• After changing the screen type, check the setting of [ASPECT RATIO] in the menu. (

→

page

104

)

[POSITION]

Adjust the screen position. Depending on the model you use and the screen type, the function may
become ineffective and the adjustable range may vary.

Using the Wall Color Correction [WALL COLOR]

This function allows for quick adaptive color correction in applications where the screen material
is not white.

NOTE:
• Selecting [WHITEBOARD] reduces light source brightness.

Selecting Fan Mode [FAN MODE]

Fan Mode is used to set the speed of the internal cooling fan.

Summary of Contents for PA1004UL-B

















































































































































































































































Search results

Summary of Contents for PA1004UL-B

Reviews:

NEC PA1004UL-B, User Manual, Page: 150 / 240

Search results

Summary of Contents for PA1004UL-B

Reviews: