13
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
Cleaning the drain filter
•
In the case of a "Pump-Model" drain hose, this filter is situated at the back side of the washer.
•
This drain filter is to screen foreign stuffs such as threads, coins, pins, buttons etc ..
•
If the drain filter is not cleaned regularly (once every three month), drain problem could
be caused.
1
Pull the filter frame upward.
2
Turn the lint filter inside
out, wash the lint off
3
Return the filter as it was,
and insert the filter frame
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
Separate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet
filter with a brush.
1
Drain the remaining
water in the hose.
Put a container under the
2
Turn the cap counterclockwise.
3
Pull out the filter
assembly
.
4
Clean the drain filter.
5
Put the filter in along the
guiding prominence of
the case. Please note the
left position of the filter
adjusting the groove to
the guide rib.
6
Turn the cap clockwise
Cleaning the water inlet filter
•
Clean the filter when water leaks from the water inlet.
with water.
Filter Frame
Lint Filter
filter to collect water
.
FILTER
CONTAINER
CAP
CASE
FILTER
CAP
CAP
FILTER
CASE
GUIDE
RIB
SUIT
into the slot.
CAP
tightly
.
CAP
