NEC NP4001 User Manual Download

Page: 86 / 151

5. Using On-Screen Display

Noise Reduction

Select the level of noise reduction required.

Range: Off, Low, Medium, High.

3D Y/C Separation

3D Y/C Separation separates composite signal to Y (brightness) signal and C (color)
signal, and can help to produce clearer and sharper images without overlapping colors
(rainbow effect).

Set 3D Y/C Separation On or Off.

Deinterlace

Deinterlace converts an interlaced image to a progressive scan image.

Select the form of Deinterlacing required from:

Still

– Select for stills such as slide projections or screen shots.

Normal

– Select Normal for non-specialized projection.

Movie

– Select for movie projection.

Downloaded From projector-manual.com NEC Manuals

Summary of Contents for NP4001
























































































































































Search results

Summary of Contents for NP4001

Reviews:

Related manuals for NP4001

Brands by name

Popular brands

NEC NP4001, User Manual

Search results

Summary of Contents for NP4001

Reviews:

Related manuals for NP4001

Brands by name

Popular brands