manualshive.com logo in svg

NEC NP400 Series, User Manual, Page: 23 / 99

Share
Download
NEC NP400 Series User Manual Download Page 23

4

2. Installation and Connections

•  Select the source name for its appropriate input connector after turning on the projector.

Input connector

SOURCE button on the projector 

cabinet

Button on the remote control

COMPUTER 1 IN

 COMPUTER1

(COMPUTER 1)

COMPUTER 2(DVI-I)IN

 COMPUTER 2(DIGITAL)

or

 COMPUTER 2(ANALOG)

(COMPUTER 2)

 

↓

 (Toggle)

(COMPUTER 2)

NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan 
converter. 
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
*  When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
  Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.

Summary of Contents for NP400 Series




































































































Reviews:

No comments