NEC NP-U321H User Manual Download Page 61

Page: 61 / 82

English ...

Appendices

Problem: Message Reminders



Over temperature - the projector has exceeded its recommended

operating temperature and must be allowed to cool down before it
may be used.

WARNING! TEMPERATURE TOO HIGH

1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C



Replacing the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.

WARNING! LAMP

LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!

WARNING! LAMP

LAMP WARNING
PLEASE REPLACE THE LAMP.

NOTE: When you continue to use the projector for another 100

hours after the lamp has reached the end of its life, the projector

cannot turn on.
If this happens, after replacing the lamp, connect the power cord

and then press and hold the HELP button on the remote control

at least 10 seconds. This will allow you to turn on the projector.

Clear the lamp hours by selecting “OPTIONS” -> “LAMP/FILTER

SETTINGS” -> “CLEAR LAMP HOURS” from the menu.



Fan failed - the system fan is not working.

WARNING! FAN LOCKED

THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.



Cleaning the filter

WARNING! FILTER

PLEASE CLEAN THE FILTER.

Summary of Contents for NP-U321H



















































































Search results

Summary of Contents for NP-U321H

Reviews:

Related manuals for NP-U321H

Brands by name

Popular brands

NEC NP-U321H, User Manual

Search results

Summary of Contents for NP-U321H

Reviews:

Related manuals for NP-U321H

Brands by name

Popular brands