122
6. Installation and Connections
Using the lock mechanism
Release: Locking screw is tightened
The lens can be attached or detached (factory default setting).
Lock: Locking screw is untightened
The lens cannot be attached or detached. Pressing the lock release but-
ton all the way in disables the lock mechanism and allows the lens to be
attached or detached.
Mounting the lens
Preparation:
Prepare a flathead screwdriver.
* The illustration omits the projector cabinet.
1. Remove the lens hood.
(1) Remove the 2 screws pinching and turning them counter-
clockwise by your fingers.
(2) Remove the lens hood by turning it counterclockwise. The
hooks on the lens hood will disengage from the front panel.
2. Remove the protective cap.
• The unit is shipped from the factory with the protective cap
installed.
Turn the protective cap counterclockwise to release it from the
catch. Remove the cap.
• Please store the protective cap in a safe place.
3. Remove the lens caps on either side of the lens.
• The NP35ZL lens unit is used as an example.
• Please store the lens cap in a safe place.
NOTE:
• Be sure to remove the lens cap. If the light source is turned on when
the lens cap remains on the lens, it may be cause of malfunction.
