manualshive.com logo in svg

NEC NP-PE401H, User Manual, Page: 44 / 87

Share
Download
NEC NP-PE401H User Manual Download Page 44

37

... English

User Controls

  CONTRAST

The contrast controls the degree of difference between the lightest 

and darkest parts of the picture. Adjusting the contrast changes the 

amount of black and white in the image.

 Press the   button to decrease the contrast.

 Press the   button to increase the contrast.

  SHARPNESS

Adjust the sharpness of the image.

 

 Press the   button to decrease the sharpness.

 

 Press the   button to increase the sharpness. 

  SATURATION

Adjust a video image from black and white to fully saturated color.

 

  Press the   button to decrease the amount of saturation in the 

image.

 

  Press the   button to increase the amount of saturation in the 

image. 

  HUE

Adjust the color balance of red and green.

 

 Press the   button to increase the amount of green in the image.

 

 Press the   button to increase the amount of red in the image. 

Input signal

BRIGHTNESS

CONTRAST

SHARPNESS

SATURATION

HUE

COMPUTER/ 

HDMI (RGB)

YES

YES

YES

NO

NO

COMPUTER/ 

HDMI (COMPONENT)

YES

YES

YES

YES

YES

VIDEO/S-VIDEO

YES

YES

YES

YES

YES

 

Yes=Adjustable, No=Not adjustable

Summary of Contents for NP-PE401H
























































































Reviews:

No comments