DICOM SIM
DICOM Simulation
enables users
in medical
environments to
display accurate
diagnostic images.
On a
green wall...
BEFORE
auto wall correction
AFTER
auto wall correction
Built-in wall color correction presets
These provide for adaptive color tone
correction to display properly on non-
white surfaces.
BUILT-IN SOFTWARE
PIP/Side-by-Side
This function allows two
sources to be displayed
on the screen at one
time in either a picture-
in-picture or side-by-side
configuration.
4000-hour filter life
NEC is committed to designing its products to provide long lifecycles. This commitment even extends to
components within its products, including the improved filter. This virtually maintenance-free filter reduces the
frequency at which cleaning is required, thereby decreasing your total cost of ownership.
DESIGNED WITH THE ENVIRONMENT IN MIND
°
Extended lamp life with ECO Mode™ technology
increases lamp life up to 4000 hours, while lowering power consumption
°
Power management
enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
°
Auto Power On
via the RGB (15-pin) input connector when a signal is detected from a computer
°
Carbon savings meter
calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
°
Quick start (3 to 4 seconds)
lets you begin presenting in seconds while quick shutdown (immediate power off with
no cooling required after shutdown) ensures efficient energy usage
°
Sleep timer
can be set to automatically turn off the projector at set countdown times
°
Low power consumption
(0.2W in stand-by mode) minimizes energy costs
°
Direct power off
provides instantaneous shutdown of the projector
Edge blending
This function seamlessly
blends multiple projected
images to display a single
high-resolution image.
Built-in stacking correction
The industry’s first built-in stacking correction
capabilities (up to four projectors) allows the
projectors to boost an image’s brightness up to 24,000
lumens, which is ideal for larger-sized screens and
environments with heavy ambient light. This feature
also prevents the complete loss of an image, which
can happen when using only one projector.