44
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched
on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to obtain the
best image quality for your LCD monitor. If used to PC vertical fre-
quency 85Hz, some noise can be seen when PIP is on. In this case,
set the PC vertical frequency to 60Hz. The set has been pre-adjusted
to the mode VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red, Green or Blue
spots. However, this will have no impact or effect on the monitor per-
formance.
d. Do not press the LCD screen with your finger for a long time as this
may produce some temporary distortion effects on the screen.
e. When the PC screen appears on the set, a message may appear on
the screen, and the message will differ according to the Window sys-
tem version (Win98, 2000). If a message appears click “Next” until the
message finishes.
f. If the message “
Out Of Range
” appears on the screen, adjust the PC
as in the ‘Displayable Monitor Specification’ section.
g. Supportable resolution may vary as per graphic card.
Displayable Monitor
Specification
RGB Mode / HDMI Mode
(Synchronization input form : separate)
Resolution
640X350
720X400
640X480
800X600
1024X768
1280X1024
1280X768
1360X768
1366X768
MODE
DOS
VGA
SVGA
XGA
SXGA
WXGA
70.0
70.0
85.0
60.0
72.0
75.0
85.0
56.0
60.0
72.0
75.0
85.0
60.0
70.0
75.0
85.0
60.0
60.0
75.0
60.0
60.0
Vertical
Frequency (Hz)
DTV
480p/60
576p/50
720p/50
720p/60
1080i/50
1080i/60
