NL10276BC24-21
DATA SHEET DOD-PP-1157 (1st edition)
30
7.3.2 Environment
7.3.4 Others
①
Do not operate or store in high temperature, high humidity, dewdrop atmosphere or corrosive
gases. Keep the product in packing box with antistatic pouch in room temperature to avoid dusts
and sunlight, when storing the product.
②
In order to prevent dew condensation occurred by temperature difference, the product packing box
must be opened after enough time being left under the environment of an unpacking room.
Evaluate the storage time sufficiently because dew condensation is affected by the environmental
temperature and humidity. (Recommended leaving time: 6 hours or more with the original
packing state after a customer receives the package)
③
Do not operate in high magnetic field. If not, circuit boards may be broken.
④
This product is not designed as radiation hardened.
7.3.3 Characteristics
The following items are neither defects nor failures.
①
Characteristics of the LCD (such as response time, luminance, color uniformity and so on) may be
changed depending on ambient temperature. If the product is stored under condition of low
temperature for a long time, it may cause display mura. In this case, the product should be
operated after enough time being left under condition of operating temperature.
②
Display mura, flickering, vertical streams or tiny spots may be observed depending on display
patterns.
③
Do not display the fixed pattern for a long time because it may cause image sticking. Use a screen
saver, if the fixed pattern is displayed on the screen.
④
The display color may be changed depending on viewing angle because of the use of condenser
sheet in the backlight.
⑤
Optical characteristics may be changed depending on input signal timings.
①
All VCC and GND terminals should be used without any non-connected lines.
②
Do not disassemble a product or adjust variable resistors.
③
See "REPLACEMENT MANUAL FOR LAMP HOLDER SET", when replacing lamp holder set.
④
Pack the product with the original shipping package, in order to avoid any damages during
transportation, when returning the product to NEC for repairing and so on.
⑤
The information of China RoHS directive six hazardous substances or elements in this product is
as follows.
China RoHS directive six hazardous substances or elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr VI)
Polybrominated
Biphenys
(PBB)
Polybrominated
Biphenyl Ethers
(PBDE)
✕
⃝
⃝
⃝
⃝
⃝
Note1:
⃝
: This indicates that the poisonous or harmful material in all the homogeneous materials
for this part is equal or below the limitation level of SJ/T11363-2006 standard
regulation.
✕
: This indicates that the poisonous or harmful material in all the homogeneous
materials for this part is above the limitation level of SJ/T11363-2006 standard
regulation.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
