NEC NF2300-SE41E Page 35 User Manual Download | Manualshive

Page: 35 / 71

background image

- 21 -

(3) Connection between array controllers and additional disk enclosures

You need to install the additional control card (NF2300-SP02E) before connecting
the additional disk enclosure with the array controller.

Push the connector at either end of the FC cable (HSSDC) into the FC connector
(DEF2) for the disk enclosure of the array controller 0 (CONT0) until a click is
heard. You can use the FC cable (HSSDC) provided with the additional disk
enclosure or the FC cable (HSSDC) of the separately priced DE cable
(NF9120-SJ04E).  The FC cable has the same connectors at both ends.  Either
connector may be connected to the controller.

Push the connector at the other end of the FC cable (HSSDC) into the FC-IN
connector on adapter 0 (ADP0) of the additional disk enclosure until a click is heard.

Similarly, connect the FC connector (DEF3) for the disk enclosure on the additional
control card installed on the other controller (CONT1) of the disk array unit to the
FC-IN connector on adapter 1 (ADP1) of the additional disk enclosure.

Do not connect any cable/connector to the DEF3 connector of additional control card
installed on controller 0 (CONT0) or DEF2 connector of the additional control card
installed on controller 1 (CONT1).

Subsequently, use the DE diagnosis cable provided with the additional disk
enclosure or the DE diagnosis cable of the separately priced DE cable
(NF9120-SJ04E).    Push the connector at either end of the DE diagnosis cable into
the DE-DIAG connector [PORT1] on adapter 0 (ADP0) of the existing disk
enclosure until a click is heard.    The DE diagnosis cable has the same connectors at
both ends.    Either connector may be connected to the adapter of the existing disk
enclosure.

Push the connector at the other end of the DE diagnosis cable into the DE-DIAG
connector [PORT0] on adapter 0 (ADP0) of the additional disk enclosure until a
click is heard.

Similarly, connect the DE-DIAG connector [PORT1] on adapter 1 (ADP1) of the
existing disk enclosure to the DE-DIAG connector [PORT0] on adapter 1 (ADP1) of
the additional disk enclosure.

«
...
33
34
35
36
37
...
»

Summary of Contents for NF2300-SE41E








































































Reviews:

No comments

Related manuals for NF2300-SE41E

WDBAAF6400EBK - My Book Essential

Brand: Western Digital Pages: 78

Brand: Labconco Pages: 66

Brand: Unison Pages: 32

Brand: Peavey Pages: 1

Brand: Peavey Pages: 2

Brand: Peavey Pages: 8

Brand: VERITAS Pages: 12

Brand: 1life Pages: 18

Brand: Raidon Pages: 15

Brand: Macurco Pages: 12

ToughTech Duo C

Brand: CRU Pages: 8

Brand: CRU Pages: 2

Brand: OBERON Pages: 3

Brand: Dauphin Pages: 16

Brand: IBM Pages: 54

Brand: Hamlet Pages: 25

Brand: Yotta Pages: 65

Bristol ControlWave CW_30

Brand: Emerson Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands