English
English-11
Specifications
Monitor Specifications
MultiSync LCD175M Monitor
Notes
LCD Module
Diagonal:
43 cm/17 inches
Active matrix, thin film transistor (TFT) liquid
Viewable Image Size:
43 cm/17 inches
crystal display (LCD); 0.264 mm dot pitch;
Native Resolution (Pixel Count):
1280 x 1024
250 cd/m
2
white luminance, 1000:1 contrast
ratio, typical.
Input Signal
15 pin Mini D-Sub:
Analog RGB
0.7 Vp-p/75 Ohms
Sync
Separate sync.TTL Level (Positive/Negative)
DVI-D:
Digital RGB
DVI (HDCP)
Audio input:
Stereo Mini Jack
1 Vrms input
Output Signal
Headphones:
Stereo Mini Jack
Display Colours
16.7 M
Depends on display card used.
Viewing Angle
Left/Right:
-80°/+80° (CR>10)
Up/Down:
-80°/+80° (CR>10)
Synchronization Range
Horizontal:
31.5 kHz to 81.1 kHz
Automatically
Vertical:
56 Hz to 76 Hz
Automatically
Resolutions Supported
Landscape:
720 x 400*
1
: VGA text
Some systems may not support all modes listed.
640 x 480*
1
at 60 Hz to 75 Hz
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
1280 x 960*
1
at 60 Hz to 75 Hz
Recommended resolution is 60 Hz for optimal
1280 x 1024 at 60 Hz to 75 H...........display performance.
Active Display Area
Horizontal:
337.9 mm
Vertical:
270.3 mm
Speakers
Practical Audio Output:
1.0 W + 1.0 W
Power Supply
100 - 240 V ~ 50/60 Hz
Current Rating
0.5 - 0.3 A (with Audio)
Power
Maximun Operation:
27 W
Consumption
Normal Operation:
19 W
Dimensions
Landscape:
368.0 mm (W) x 358.5 - 408.5 mm (H) x 230.0 mm (D)
14.5 inches (W) x 14.1 - 16.1 inches (H) x 9.1 inches (D)
Weight
5.2 kg (11.5 lbs)
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
20% to 80%
Altitude:
0 to 2,000 m/0 to 6,562 Feet
Storage Temperature:
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Altitude:
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.
