1. System BIOS
Chapter 2 Convenient Features
1.2.5
Boot
If you move the cursor to
Boot
, the
Boot
menu where you can configure the boot order appears.
For details about the options, see the table below.
Option
Parameter
Descriptions
Boot Configuration
–
–
Quiet Boot
Disabled
[Enabled]
Enable or disable the feature to display logo during
POST. When this option is set to
Disabled
, the results of
POST execution are displayed instead of the logo.
If
BIOS Redirection Port
is enabled, this option is
shown as
Unavailable
and inaccessible (run with
Disabled
state automatically)
Bootup NumLock State
On
[Off]
Enable or disable NumLock feature of keyboard.
Setup Prompt Timeout
Number
Specify the time until the <F2> is pressed to launch
SETUP. The factory setting time is "0" (minimum).
Boot Mode Configuration
–
–
Boot Mode
[UEFI Mode]
Legacy Mode
Specify the boot mode of OS.
Specify
UEFI Mode
in usual case. If booting Legacy OS,
specify
Legacy Mode
.
Boot Option Priorities
–
–
Boot Option #1 - #7
–
Shows the priority of boot devices.
If all of the Boot Options are set to
Disabled
, the SETUP
starts running upon completion of POST.
UEFI CD/DVD Drive BBS Priorities
–
Specify the boot priority for each BBS (BIOS Boot
Specification).
UEFI USB CD/DVD Drive BBS
Priorities
–
UEFI USB Floppy Drive BBS
Priorities
–
UEFI Hard Disk Drive BBS Priorities
–
UEFI USB Key Drive BBS Priorities
–
UEFI USB Hard Disk Drive BBS
Priorities
–
UEFI Network Drive BBS Priorities
–
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
91
