1. Setup Procedure
Express5800/R320g-E4,
R320g-M4
Installation Guide (VMware)
15
Chapter 1 Installing Operating System
1.3
Enabling Internal Hard Disk Drive
The following procedure shows when installing or reinstalling VMware ESXi to the internal hard disk drive.
Go to
“1.4 Enabling Fibre Channel card”
when installing or reinstalling VMware ESXi to the external storage.
1. Turn on the display and the peripheral equipment connected to the server.
Note
If the power cords are connected to a power controller like a UPS, make sure that it is
powered on.
2. Detach the front bezel.
3. Press the POWER switch that is located on the front side of the server.
Lift the acrylic cover, and press the POWER switch.
Important Do not turn off the power before the logo
appears.
After a while, the logo will appear on the screen.
Tips
While the logo is displayed on the screen, the server performs a power-on self test (POST)
to check itself. For details, refer to
Chapter 3 (1.1 POST)
in
User’s Guide
.
Note
If the server detects errors during POST, it will interrupt POST and display the error
message. Refer to
Chapter 1 (6.2 POST Error Message)
in
Maintenance Guide
.
POWER switch
Acrylic cover
