NEAX2400 ICS ISDN PRI Installation Notes
ETI-152A Page 12
ADPC Assign the determined point code. Same point code is used for the B and D
route of one interface. If more than one ISDN link is used and no NFAS is used,
each interface will have a different point code.
ACIC Assign the point code to a CSC without LEN.
ACSC Assign the CSC even and odd to the DCH LEN. See paragraph
5.5
for more
information.
MBTK Idle all the TK, including the D channels.
AMND Assign the necessary number of digits. Data numbers for CCIS or ISDN should
be set as Digital A/D=1.
ARNP Assign the B route access code.
AFRS Assign the necessary numbers for specific OPRs.
AOPR Assign the route of the B channels.
ACBC Assign the services associated with the specific OPR, if necessary.
ACNP Assign CNP per route used for sending the CPN to the network.
ACND Assign the area code office code for the CPN.
ACDD Assign the DNIS incoming number conversion, if necessary.
ASFC Assign the Presentation Restricted or CPN/BN Preferred.
AANDE Assign an office code and NPA combination per each tenant for multiple CPNs
(overrides ACNP and ACND).
5.2 ASYD Command
ASYD
SYSTEM INDEX DATA ASSIGNMENT
SYSTEM1 INDEX186 Bit 6 = 1 for ISDN in Service
SYSTEM1 INDEX375 Bit 0 = 1 for releasing of trunk lockup
NOTE:
INDEX 187=00, Number of DCH, is not used when ISDN ICS uses the PA-24PRT
card.
