NEC NEAX2000 IVS, User Manual

Page: 44 / 78

CHAPTER 3 ND-46550 (E)
Page 36
Revision 2.0
(3) Switch Settings
In Table 3-7 , the figure in the SWITCH NAME column and the position in in the SETTING POSI-
TION column indicate the standard setting of the switch. When the switch is not set as shown by the figure
and
, the setting of the switch varies with the system concerned.
Table 3-7 Switch Settings on PN-DAIB Card
SWITCH
NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SW1 (Rotary
SW) 0 – F Always set to 0
1 – F Not used
MB (Toggle SW)
Note
UP For make-busy
For normal operation
SW1 (Piano Key
SW)
1
Always set to OFF
2
Always set to OFF
3
Always set to OFF
4
Always set to OFF
0
ON
OFF
ON
OFF
4
3
2
1
OFF
OFF
OFF
OFF