NDA-24219 CHAPTER
3
Page 25
Revision 2.0
Figure 3-2 Procedure Flowchart (Continued)
The label, shown in
, is attached to the NAP sheet for each procedure in which circuit cards are handled.
When doing such a procedure, the installer must perform the procedure with caution, to prevent damage caused by
static electricity (See Section
in this chapter).
Figure 3-3 Static-Sensitive Caution Label
A
END
MOUNTING OF
MOUNTING OF FRONT COVER
SYSTEM INITIALIZATION
AND
SYSTEM DATA ENTRY
OPERATION
TEST
CLEANING AND
CIRCUIT CARDS
VISUAL CHECK
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required