NEC NE3304-149, User Manual

Page: 44 / 46

- 44 -
7. Appendix
General Specification
Interface
internal PCI-Express
®
2.0 compliant
external SFP slot
Data Rate
PCI-Express
® 5GT/s x8lane (Gen.2 or higher)
LAN 10Gbps ,Full Duplex x 2port
Connector
internal
PCI-Express
®
Gen.2(or higher) x8 lane
x8 lane and x8 sized slot are required
external SFP slot 2 slots
Controller
Broadcom
®
BCM57810
Dimensions 68.9mm(W) 145mm(L)
Weight 90g(attached Full-Height Bracket)
Supply Voltage 3.3V/12V
Power Consumption
Typical 12W
Max. 21W
Environment Operating
Temp. 5-40
℃
Humid. 20-80%
RH
(non-condensing)
Storage
Temp. -10-55
℃
Humid. 5-95%
Network Cables
NE3304-129 SFP+ module (10G-SR) has an optical fiber interface based on IEEE802.3ae
10Gigabit Ethernet® standard. The 10GbE SR standard enables 10GbE and full duplex
transmissions at distances up to 300 meters using standard multi-mode fiber (MMF , 850nm
wave length) cabling.
Supported MMF cable listed below:
Connector type : LC
core/clad diameter Modal bandwidth Type Cable length
50/125μm
400MHz*km OM-2
2
～
66 m
500MHz*km OM-2
2
～
82 m
2000MHz*km OM-3
2
～
300 m
62.5/125μm
160MHz*km OM-1
2
～
26 m
200MHz*km OM-1
2
～
33 m
OM: Optical Multimode
About DA cable (Direct Attach; Twin-Ax).
The following is a list of 3rd party direct cables that have received some testing.
- Amphenol 5m 57750JJ03
- Gore 7m SFN8000-7
- Molex
- Molex
1m
3
ｍ
74752-1101
74752-1301
- Molex
5
ｍ
74752-1501
- Molex
7
ｍ
74752-1701