24
1. What’s in the Box? and the Names of the Projector Parts
1-3-2. Rear of the projector
1
8
9
10
3
4
2
6
5
7
1. STATUS indicator (for projector)
These indicate the status of the projector. When the projector is operating normally, these light/blink in green or orange.
When an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen.
(See page 65)
2. STATUS indicator (for laser)
This indicates the status of the laser. It lights in white while laser is being projected. (See page 65)
3. Emergency stop switch
When an abnormality occurs during the operation of the projector or the laser unit, or an emergency (attendance in laser
projection range, earthquake/fire, etc.) occurs, you can immediately stop laser projection (emergency stop status) by
pressing this switch. The projector cannot be operated during the emergency stop status. Rotate the switch to arrow direc-
tion or pull it to release the emergency stop status.
4 Air Outlet
Exhaust heat in electric circuit section of the projector. Do not cover.
5. Handle for transportation
The handle is used when transporting the projector.
6. Dedicated interface cable
This is the interface cable that connects with the laser unit.
7. Level adjusters (in four positions)
In the ordinary installation, you can adjust the projector inclination at 4 positions.
8. Optical fiber cable mounting port
Mount optical fiber cable of the laser unit to the inside of the projector through this section. Consult your dealer for installing/
removing the optical fiber cable.
9. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of
projected screen. (See page 27)
10. Connection terminals
Various image signal cable, AC power cable, and LAN cable are to be connected here. (See page 26)
