856-126401-102-00
■
Components
After you unpack the package, check if it contains the following.
●
Processor
●
Heat Sink
●
Additional CPU Kit Setup Card (This Manual)
■
Caution
Follow these notes when you install the CPU Kit.
●
Do not put the Additional CPU in a dusty place.
●
Do not put the Additional CPU in a place where water or liquid is likely to splash onto the board.
●
Do not put the Additional CPU in a place where steam of sulfur occurs in the air.
●
Do not put the Additional CPU in magnetic field.
●
Do not touch terminal part of Additional CPU.
●
Do not touch contact of Additional CPU socket.
■
Installation of Additional CPU
According to the User
’
s Guide of the CPU blade
and the Blade
Assembly Unit, install the additional CPU Kit.
■
IMPORTANT:
●
It inserts in accordance with the pin mark of CPU and
a
socket.
●
Do not tilt the CPU or do not slide into the CPU socket.
After Installation, select [Advanced] - [Reset Configuration Data]
in the [Advanced] menu and set [Reset Configuration Data] to
[Yes].
(See your User’s Guide which is in the EXPRESSBUILDER for detail.)
■
Transfer of the Unit to a Third Party
When transferring (or selling) the unit to a third party, give this operation manual to that party.
These contents of this document will be changed without notice.
Code Type
Clock
freq.
Front side bus
Freq.
Cache memory
size
N8401-032 Intel
®
Xeon
®
Processor 7300 Series
1.60GHz
1066MHz
4MB(2
×
2MB)
N8401-033 Intel
®
Xeon
®
Processor 7400 Series
2.40GHz
1066MHz
9MB(3
×
3MB)
N8401-032/033
CPU Kit Setup Card
*856-126401-102-00F*
