- 38 -
(1) PCI Express connector
Connector to be inserted into the PCI slot of the computer.
This product’s PCI Express connector type is x8.
(2) Bracket
Bracket to fix this product to the extended slot of Computer.
When fixing this product to a PCI slot optimized for the low profile type, replace the
bracket with the attached low profile one.
(3) SFP+ Module
Module to transmit and receive Fibre Channel signals. Need to remove temporarily when exchange a
bracket or install this product into computer.
Don’t insert the SFP+ module of this product to the other port or the other Fibre
Channel device.
(4) LED (Port1/Port2)
The three Green LEDs for each port give a visual indication of the operating state.
LED1
LED2
LED3
State
Off
Off
Off
Power Off
On
On
On
Power On (Before POST)
Flashing
Flashing
Flashing
Power On (After POST) or Link Down
Flashing in
sequence
Flashing in
sequence
Flashing in
sequence
Firmware Fault
On or Flashing
Off
Off
16Gbps Link Up and Active
Off
On or Flashing
Off
8Gbps Link up and Active
Off
Off
On or Flashing
4Gbps Link up and Active (not support)
Flashing
Off
Flashing
Beaconing
If the product fails at POST, please check the following items.
- Is the product installed in the computer correctly?
- Are all Fibre Channel cables and power cords connected correctly?
(5) Fibre Channel Connector
Connector (LC Connector) used to connect this product to a Fibre Channel device.
Do not remove dust cover when not connected to Fibre Channel device.
(6)WWPN
The WWPNs of each port are displayed by this label.
Tips
Tips
Notice
Notice
LED2
LED3
LED1