NEC N8181-191, Assembling And Handling Manual, Page: 10 / 12

N8181-191 Additional FAN kit for PCI
Assembling and Handling Guide
-
10
-
6. Remove the PCI holder attached to the server.
The protrusion of the PCI Holder is inserted into the hole in the frame of the server,
so remove it while pushing the protrusions on the PCI Holder.
7. Install the PCI holder <2> of this product. Install it in the reverse order of removal.
8. Make sure PCI bracket is aligned and sit appropriate within frame guide.
Then, close the PCI Holder.
Push here and take it out
As shown in the figure, install it so that it fits into the hole in the frame
of the server.
Server Inside
Server outside