84 Specification
Specifications
The N8160-48 External AIT has the following specification:
■
Performance
Memory capacity
50 Gbyte (In the compression mode: 100 Gbyte) when
using AIT2 Data Cartridge: tape length 230 m
35 Gbyte (In the compression mode: 70 Gbyte) when using
AIT1 Data Cartridge: tape length 230 m
25 Gbyte (In the compression mode: 50 Gbyte) when using
AIT1 Data Cartridge: tape length 170 m
The value in the compression mode is obtained when the
compression efficiency is X2.
The compression efficiency varies with the data pattern.
Bit error code
10
-17
or less
Data transfer speed (TAPE)
AIT2: 6 Mbyte/second (in the non-compression mode)
AIT1: 4 Mbyte/second (in the non-compression mode)
Burst data transfer speed (SCSI)
40 Mbyte/second (max, synchronous)
Depending on your connection environment, it may not be
possible to set 160 Mbyte/seconds.
Initialize time
Less than 5 seconds
Load time
Less than 14 seconds
Unload time
Less than 20 seconds
Rewind time
Less than 105 seconds
■
Environmental requirement
During operation
Temperature: 10
°
C to 35
°
C
Humidity: 20% to 80% (no dew condensation allowed)
Highest dry bulb temperature: 26
°
C
During non-operation
Temperature: –40
°
C to 70
°
C
Humidity: 5% to 95% (no dew condensation allowed)
■
Power supply specification
Voltage
AC100–240 V
Frequency
50/60 Hz
Power requirement
22 W (Max.)
Summary of Contents for N8160-48
Page 2: ......
Page 43: ...仕 様 41 198 0 mm 64 5 mm 246 mm 重量 2 3 kg 寸法 重量 ...
Page 87: ...Specification 85 Dimensions weight 64 5 mm 198 0 mm 246 mm Weight 2 3 kg ...
Page 95: ......
