Built-in AIT
99
Important
• Installing the dust cover
To avoid damaging the dust cover, it
is designed to be easy to install and
remove.To install the dust cover, hold
it slightly (as illustrated) and insert
the pins at both ends of the cover in
turn until you hear them clik.
Ejecting the AIT data cartridge
1
Confirm that the TAPE MOTION LED is not blinking.
2
Pressing the EJECT button, Built-In
AIT starts rewinding the tape (this
may take a few minutes).
When the tape is completely
rewound, the data cartridge is
automatically ejected from the Built-
In AIT.
Important
Depending on your backup software or operating system lock, you may not be able to eject the data
cartridge in the drive by pressing the EJECT button. Eject the data cartridge from the backup
software or wait some time and retry the EJECT button. If you are still unable to eject the data
cartridge, press and hold the EJECT button for 5 or 10 seconds to forcefully eject the data cartridge.
Dust cover
Fig. 1