NEC N8105-63, User Manual

Page: 29 / 46

E- 5
Precautions for Installation, Relocation, Storage
and Connection
Do not use any unauthorized interface cable.
Use only interface cables authorized by NEC and locate a proper device and connector
before connecting a cable. Using an authorized cable or connecting a cable to an improper
destination may cause a short circuit, resulting in a fire. Also, observe the following notes
on using and connecting an interface cable.
-
Do not use any damaged cable connector.
-
Do not step on the cable.
-
Do not put any object on the cable.
-
Do not use the card with the loose interface cable connection.
-
Do not use any damaged cable.
Do not use the equipment in the place where corrosive gases exist.
Make sure not to locate or use the equipment in the place where corrosive gases (sulfur
dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone, etc.) exist.
Also, do not set it in the environment where the air (or dust) includes components
accelerating corrosion (ex. sulfur, sodium chloride) or conductive metals.
There is a risk of a fire due to corrosion and shorts of an internal printed board.
Contact your service representative for the place appropriate to the equipment.
Precaution on disposing or transferring
-
Follow the ordinances by your local government when you are disposing the product.
Contact the local government for more information.
-
If you are transferring this product to other people, be sure to transfer all items that
come with the product including this guide along with the product.