![background image](http://html2.mh-extra.com/html/nec/n8104-225/n8104-225_user-manual_4810576057.webp)
E-
22
Uninstalling QSFP Module
Remove the QSFP module from the board.
Grasp the pull tab and pull to
release the latch, and then
remove the module.
IMPORTANT:
-
Secure the Dust covers.
-
If a MPO cable is not connected, the MPO connector must be attached
a Dust cover (MPO).
-
Listen for an audible clicking sound when the QSFP+ module is inserted
into the QSFP slot
-
If you cannot insert the QSFP module as far as it will go, please remove
it and then check the direction of QSFP module.
Summary of Contents for N8104-225
