![background image](http://html1.mh-extra.com/html/nec/n8104-157/n8104-157_installation-manual_3827761008.webp)
- 8 -
April 2016(1
st
Edition)
808-882328-319-A
2.4. Setting up LAN drivers
Important
・
Sign in the system by administrator account for execute the operation below.
・
After changing parameters of the LAN driver, restart the system.
2.4.1. Setting up common
(1) Setting link speed
Important
The transfer rate and duplex mode of the network adapter must be the same as
those of the switching hub.
Follow the procedure below to specify the transfer rate and duplex mode.
1. Open the
Device Manager
.
2. Expand
Network Adapters
, and then double-click the name of the network adapter you
want to set. The properties of the network adapter will be displayed.
3. Select the
Advanced
tab, and then set the
Speed & Duplex
values to the same as those of
the switching hub.
4. Click
OK
in the network adapter properties dialog box.
(2) Flow Control
It is necessary to set the Flow Control parameter of the network adapter matching to the
connected network equipment (switching hub etc.).
Please set Flow Control parameter by the following procedures.
Note
Server Adapter and link partner must be configured by the same value.
-
Disabled
:
Disabled
-
Rx & Tx Enabled
:
Receive & Transmit Enabled
-
Rx Enabled
:
Receive Enabled
-
Tx Enabled
:
Transmit Enabled
1. Open
Device Manager
.
2. Expand
Network Adapters
, and then double-click the name of the network adapter you
want to set. The properties of the network adapter will be displayed.
3. Open
Advanced
tab and click
Flow Control
to show
Value
.
4. The value can be configures by the down-arrow button.
5. Click
OK
in the network adapter properties dialog box.