NEC N8104-128, Installation Manual

Page: 33 / 47

- 33 -
April 2011 (3rd Edition)
808-882328-264-C
2.4.2. Jumbo Packet
It is necessary to set the Jumbo MTU parameter of the network adapter matching to the connected
network equipment (switching hub etc.).
Please set Jumbo Packet parameter by the following procedures.
1. Open [Control Panel].
2. Open [Administrative Tools] -> [Computer Management] -> [Device Manager].
3. Open [Device Manager] -> [Network Adapter] -> [Broadcom BCM57711 NetXtreme II 10 GigE
(NDIS VBD Client)] and right click to open the [Properties].
4. Open [Advanced] tab and click [Jumbo Packet] to show [Value].
5. Change the value by the up-arrow button or down-arrow button. And click [OK].
6. Restart the system.
Check
"Jumbo Packet" is capable configure from 1500byte to 9600byte.
Important
If Flow Control configured to any parameter accepted Disabled, Jumbo
Packet is recommended set less than 4000Byte.
Set all Jumbo Packet to the same value to all adapters that composes the
team.