16
Driver Setup
This segment explains the method of setting up the driver.
At first, Read “Before installation” and select an appropriate procedure.
Preparation
For the first time installation, see “
See “
” (page16),if this product has been used before and run update or
installation by an appropriate procedure according to the driver version.
Driver name
Version
Procedure
N/A
See “
1.4.6.1
Chelsio T3 Ndis Function driver
Chelsio S310 10G Ethernet Function Enumerator
1.4.14.5
Installation or update is unnecessary.
When drivers are uninstalled from the system, See “
Driver version confirmation
1. Open
[
Control Panel
].
2.
Open [
Administrative Tools
] -> [
Computer Management
] -> [
Device Manager
]
3. Open [
Device Manager
] -> [
Chelsio T3 Ndis Function driver
] and right click to open the
[
Properties
]
4. Open
[
Driver
] tab and confirm the [
Driver Version
].
Confirm it is the same version as driver information on the table below
5. Open [
Device Manager
] -> [
S310 10G Ethernet Function Enumerator
] and right click to
open the [
Properties
].
6. Open
[
Driver
] tab and confirm the [
Driver Version
].
Confirm it is the same version as driver information on the table below.
Driver Information
Driver name
version
Chelsio T3 Ndis Function driver
1.4.14.5
Chelsio S310 10G Ethernet Function Enumerator 1.4.14.5