856-129899-202-00
(4) Memory board installation procedure
a. The memory board has cutouts to prevent incorrect insertion. Please orient the board so
that the connector polarity and board cutouts match. (See the following figure)
b. Insert the board vertically on the connector. Press the levers at each end of the connector
so that they fasten the half-circle shaped cutouts on each edge of the board. (See the
following figure)
(5) Continue to install or remove internal optional devices, mount and connect the server, and
turn it on.
(6) Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, refer to
Chapter 3 (2.BIOS Setup Utility)
for BIOS Setup Utility in
“User’s Guide”.
(7) Run BIOS Setup Utility, and select
Memory Configuration
and then
Memory Information
from the
Advanced
menu. Make sure the capacity of added DIMM is displayed properly.
Refer to Chapter 3 (2.BIOS Setup Utility) for BIOS Setup Utility in “User’s Guide”.
(8) Select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory
Retest
.
After that, select
Save Changes and Exit
to reboot.
