NEC Display Solutions of America, Inc.
X981UHD-2 Installation Guide
98” LCD Display
Rev 1.0
www.necdisplay.com
X981UHD
Page 9 of 9
Cable Connection
Communication Protocol:
Interface:
RS-232C
Communication System: Asynchronous
Baud Rate:
9600 bps
Data Length:
8 bits
Parity:
None
Stop
Bit
1
bit
Communication Code:
ASCII
Interface:
Ethernet (CSMA/CD
Communication System: TCP/IP (Internet Protocol Suite)
Communication Layer:
Transport layer (TCP)
IP Address:
192.168.0.10 (default out of box)
Port Number:
7142 (Fixed)
Browser Control
Information and control can also be available through the HTTP browser control menu.
In order to accomplish this, type:
http://<the Monitor’s IP address>/pd_index.html
Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.
All displays are set to the IP address 192.168.0.10 out of the box
Communicating network PC needs to be on the same subnet as display that is being communicated with
Note:
Above browser control states X841UHD but is consistent with the X981UHD-2.
Transmit Data+
Transmit Data-
Receive Data+
Receive Data-
Not Used
Not Used
Not Used
Not Used