NEC Display Solutions of America, Inc.
V463-TM Installation Guide
46” LCD Display
Rev 1.0
www.necdisplay.com
V463-TM
Page 2 of 10
Ventilation Recommendations (all models)
Dimensions below are minimum recommended for proper ventilation.
NOTE:
The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.
Touch Driver installation
o
In order for the touchscreen to properly work, the source computer needs to be connected to the
display via provided USB A to B cable. This connection on the screen is on the upper back right
side. See image to the right.
o
When plugging in the USB A to B cable from a Windows 7 or XP source computer to
V463-TM, touch screen should react and act as a HID device,
automatically downloading all touch driver information.
o
USB plug-in is located on the upper portion of the left side of the display.
