NEC Display Solutions of America, Inc.
V463-TM Installation Guide
46” LCD Display
Rev 1.0
www.necdisplay.com
V463-TM
Page 1 of 10
Contents
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Recommendations, Touch Driver Setup
Page 2
Display Dimensions
Front, Top, Right, Left, Bottom
Page 3
Rear
Page 4
With
stand
Page 5
Table Top Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Optional Speaker Dimensions
Page 8
Optional Wall Mount Dimensions (WMK-3255S)
Page 9
Input Panel, Control Codes
Page 10
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective Protective Glass
Resolution:
1920 x 1080
Dimensions without stand: 43.1”(W) x 25.6”(H) x 3.2”(D)
Aspect Ratio:
16:9
Dimensions with stand:
43.1”(W) x 27.0”(H) x 13.8”(D)
FCC:
Class B
Weight without stand:
62.0 lbs
Power Consumption:
85W (typ)
Weight with stand:
66.1 lbs
BTU’s:
290.03
BTU/hour
(typical)
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in either landscape or portrait orientation.
CLOCKWISE ROTATION ONLY
MAXIMUM TILT ANGLE
