background image

English−80

Controlling the Monitor via RS-232C

This monitor can be controlled by connecting a personal computer with an RS-232C (reverse type) terminal.

For example, some of the functions that can be controlled by a personal computer are:

• 

Power ON or standby.

• 

Switching between input signals.

• 

Sound Mute ON or OFF.

Connection

M computer.

• 

Please turn off the monitor’s main power before connecting a computer to the monitor.

• 

Please turn on the connected computer first then turn on the monitor’s main power.

If you turn on the computer and monitor in reverse order, the com port may not work.

RS-232C Cable

Computer

RS-232C

NOTEN:  

•  If your computer is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required.  
 

Contact your supplier for details.

•  For the pin assignment, please see “2) RS-232C input/output” on 

page 81

.

To control the monitor via commands sent from a computer connected with an RS-232C cable, please use the control  
command. Instructions for the control command can be found in the Control Command Diagram (see 

page 77

) or the 

“External_Control.pdf”. See 

page 104

Interface

PROTOCOL

RS-232C

BAUD RATE

9600 [bps]

DATA LENGTH

8 [bits]

PARITY

NONE

STOP BIT

1 [bit]

FLOW CONTROL

NONE

This monitor uses RXD, TXD and GND lines for RS-232C control.

The reverse type cable (null modem cable) (not included) should be used for RS-232C control.

Summary of Contents for MultiSync UN462VA








































































































































Reviews: