NEC MultiSync SC40, User Manual

Page: 34 / 148

English-28
OSD Controls
- continued
DatE & tiME
Sets the date, time, and daylight saving region. Date & time must be set in order for the
“SCHEDuLE” function to operate.
YEar
MontH
DaY
tiME
DaYLigHt SaVing
SCHEDuLE rESEt resets the following settings within the SCHEDuLE menu back to factory setting:
oFF tiMEr, SCHEDuLE SEttingS.
PiP
KEEP PiP MoDE allows the monitor to remain in “PiP” mode after powering off. When Power is returned,
PiP appears without having to enter the oSD.
PiP MoDE Picture-in-Picture
oFF
PiP
PoP
SiDE BY SiDE (aSPECt)
SiDE BY SiDE (FuLL)
PiP SiZE Selects the size of the sub-picture used in Picture-in-Picture (PiP) mode.
SMaLL
MiDDLE
LargE
PiP PoSition Determines where the PiP appears on the screen.
PiP rESEt resets the following settings within the PiP menu back to factory setting:
KEEP PiP MoDE, PiP MoDE, PiP SiZE, PiP PoSition.
oSD
LanguagE
Select the language used by the oSD.
EngLiSH
DEutSCH
FranÇaiS
itaLiano
ESPaÑoL
SVEnSKa
oSD turn oFF turns off the oSD after a period of inactivity. the preset choices are 10-240 seconds.
oSD PoSition Determines the location where the oSD appears on the screen.
uP
DoWn
LEFt
rigHt
inForMation oSD Selects whether the information oSD is displayed or not. the information oSD will be
displayed when the input signal or source changes. the information oSD will also give
a warning when there is no-signal or the signal is out-of range.
an interval between 3 to 10 seconds for the information oSD to appear is avaiable.
Monitor inForMation Monitor information.