Full connectivity and control with the option for expansion in every display
The P Series touts the industry’s most extensive control, diagnostics and communication, providing the highest level of remote display
management. These include:
•
RS-232 enables multi-display control and daisy chain, allowing for individual and group-addressable control, and simple,
effective setup and monitoring of the display
•
Ethernet connectivity adds the same RS-232 control plus automatic email notification for diagnostic purposes
•
NaViSet™ software offers an intuitive graphical interface, allowing for easy adjustment of display settings via mouse and
keyboard. NaViSet Administrator provides all the advanced control to remotely located IT professionals.
•
DDC/CI standard allows for PC control of the display based on the VESA command set
•
Ca uses a digitized signal delay circuit to automatically compensate for each red, green and blue cable’s length and
video signal delay, ensuring sharp image reproduction despite long cables and low output level*
•
Expanded connectivity with digital loop through (DVI-D and DisplayPort)
A built-in expansion slot future-proofs your display investment, allowing for seamless integration of optional NEC and third-party
components, including:
•
Open Pluggable Specification (OPS): The first industry-wide standardization in option slots, simplifying installation, use and
maintenance of digital signage.
•
HD-SDI card (SB-L007KK): Achieve broadcast-grade video with this internal card that provides an HD-SDI input without using
additional space or power.
•
Single board computer (NET-SBC-01/02/03/04, OPS-PCAF-WH/WS/H/S, N8000-8830): This option provides for a seam less
internal PC solution that is both cost-efficient and flexible. It eliminates the need for external cabling, mounting and power supply,
provid ing for a clean look that simplifies installation and reduces maintenance.
•
Digital IP tuner (MPD-DTi): This IPTV card enables you to stream up to 1080p content directly to the display as well as ATSC/NTSC/
Clear QAM signals. Other features include auto scan, DTV signal strength, parental controls, closed caption and network settings—
all adjustable from the display.
•
CAT5 receiver: Using NEC-approved third-party solutions, you’ll be able to safely send your video over longer distances.
The P Series sets the standard for connectivity. Improved input options include quick input change, customized detection and naming.
See below for the complete list of P Series input/output terminals.
*use under the environmental conditions noted in the specifications and user’s manual
RS-232 In/Out
Speaker Out
LAN Port
IR In/Out
5 BNC In (RGBHV,
DVD/HD or
Composite Video)
HDMI In
VGA D-Sub In
Audio
Mini-Jack
In/Out
BNC Composite
Video In/Out
DisplayPort
In/Out
DVI-D In/Out
RCA Audio In
S-Video
In
