NEC MultiSync LCD2490WUXi, User Manual

Page: 21 / 136

18
Tag 3 AUTO ADJUST
LEVEL
(Analog input only)
Determines which items are to be adjusted when the AUTO
ADJUST function is activated.
The choices are “SIMPLE” “FULL”, and “DETAIL”.
Press ”Left” or “Right” to select.
Size, Fine,
Position
Contrast Black Level, Long
Cable capability**
Time
SIMPLE O X X 1 Sec.
FULL O O X 1.5 Sec.
DETAIL* O O O 5 Sec.
O: Automatic Adjustment X: No Automatic Adjustment
* “DETAIL” activates automatic long cable (skew, peaking) adjustment.
** Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the
* Long Cable Software. To download the software, please visit www.necdisplay.com.
A-NTAA SW
(Analog input only)
The Advanced No Touch Auto Adjust function is able to
recognize new signals even when neither the resolution nor the
refresh rate has changed. If several PCs are connected to the
monitor, and each transmit very similar (or even the same) sig-
nals in terms of resolution and refresh rates, the monitor recog-
nizes that there is a new signal and automatically optimizes the
picture without the need for any action on the part of the user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the
monitor to the optimal settings for the new signal. If no change
in the signal is detected then A-NTAA does not activate. The
screen will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen
does not go blank when the monitor makes adjustments for
changes in signal, allowing the monitor to display the new sig-
nal faster. When using an external switching device to connect
2 or more PCs to the monitor,using either the ON or OPTION
setting is suitable.
Advanced OSM Controls
– continued